FTTH Outdoor Box Fiber Optic Plastic Box 12 Core Fiber Optic Distribution Box
The equipment is used as a termination point for the feeder cable to connect with the drop cable in the FTTx communication network system. The fiber splicing, splitting, and distribution can be done in this box, and meanwhile, it provides solid protection and management for the FTTx network building.
Product Features
The product is made of high-quality and impact-resistant plastics, and has a standard-use interface;
Can install 1x8 steel pipe type PLC splitter;
With anti-UV, impact, and waterproof features;
Can be mounted on the wall or pole;
A unique and reversible plate makes a larger space for fiber management, a more distinctive area for fiber splicing and splitting, and the line crossing is reduced.
Cable can access the box with no need to break.
Application
This product integrates optical fiber splicing, splitting, and wiring. It can realize the cable direct or branch connection. Connecting to the optical communication equipment is suits for the terminal access of the user end. Through the adapter installed in the box, the drop cable leads the signal out, and achieves optical fiber distribution; also applies to the protective connection of cables and pigtails; in addition, the optical cable can also be spliced with home cable after splitting, and then leads the signal out to achieve direct connection.
Technical index
Fiber radius of curvature: ≥40mm
Optical disk additional loss: ≤ 0.01dB
Temperature Range: - 40°C ~ + 70°C
Anti lateral pressure: ≥2000N / 10 cm
Shock resistance: ≥20N.m
Product specification
Size(mm): L x W x H
|
224*212*73
|
Weight
|
0.7
|
Cable diameter (mm)
|
≤¢7
|
Inlet/outlet
|
2/12
|
Max capacity
|
12 (single core)
|
Installation procedure
Pre-install the box with the expansion screw or pole mounting set in the desired position;
Install the adaptors into the corresponding rack, and tighten them with screws;
Strip the cable, remove the outer and inner sheath, and loose tube, clean and remove the oil filling paste in the cable, and leave ~1.2m of bare fiber length and 30 50mm steel core; after the fiber is introduced into the box through the port, fix it with the cable pressing ring, and tighten it with re-enforced core;
The bare fiber protective tube is used to protect the stripped fiber, the optical fiber is introduced into the cable winding wheel and coiled, and the fiber end is led to the splicing slot;
Connect the incoming fiber pigtail to the adaptor, coil the fiber in the tray, lead the end to the heat-shrinkable tube placed in the splicing slot;
after splicing, the joint is clipped in the slot, cover it with the black rubber lid;
Shenzhen Shengmeida Communications Co., Ltd. (SMD) was established in 2011 and has become a leading supplier of innovative optical fiber communications products. Our unwavering dedication to quality, innovation, and customer satisfaction has made us a trusted partner in the industry. Our expertise lies in the quality and manufacture of products widely used in various fiber optic telecommunications sectors including telecommunications, cable television, fiber optic data transmission, and local area networks. Our main FTTH products include fiber optic cables, fiber optic patch cords, fiber optic attenuators, fiber optic terminal box/patch panels, fiber optic adapters/connectors, PLC splitters, etc.
We focus on designing and manufacturing a full range of optical fiber communication products to meet the needs of different industries. Our products include fiber optic cables, fiber optic patch cords, fiber optic attenuators, fiber optic quick connectors, fiber optic adapters/connectors, and PLC splitters, all designed to meet the highest performance and reliability standards.
![FTTH Outdoor Fiber Optic Plastic Box 12 Core Fiber Optic Distribution Box](//www.micstatic.com/athena/img/transparent.png)
Q1: Who are we?
A: We Shenzhen Shengmeida Communications Co., Ltd. (SMD) was established in 2011, located in Shenzhen Guangdong China. We have over 12 years of experience in manufacturing optical fiber communications products.
Q2: What products does SMD specialize in manufacture?
A: We SMD specialize in the manufacture of various fiber optic communication products including fiber optic cables, fiber optic patch cords, fiber optic attenuators, fiber optic terminal box/patch panels, fiber optic adapters/connectors, and PLC splitters, etc.
Q3: Do you provide a product guarantee?
A: Yes, we provide 1-2 years warranty for our products.
Q4: What's your MOQ?
A: Low MOQ, Sample for testing is available.
Q5: Can I print our logo on the product?
A: Yes, Branding or Labeling is available.
Q6: Can you provide OEM/ODM service?
A: Yes, Customize is available ( including the specification, color, or packaging).
Q7: How to deal with the faulty?
A: Firstly, Our products are produced in a strict quality control system and the defective rate will be less than 0.1%.
Secondly, during the guarantee period, we will replace it with a new one and ship it together with a new order for a small quantity. For defective batch products, we will repair them and resend them to you or we can discuss the solution including re-call according to the real situation.
Q8: How do you ship?
A: We can ship out the goods by Airline, Sea, or by International Express EMS, DHL, FedEx, TNT, UPS, or with your shipping agent.
Q9: What about delivery time?
A: Samples: within 3 days. Order: 3-7 days working days.
Q10: What is your main market? Do you have any customers in Europe?
A: We have established lasting relationships with customers from different countries, including Italy, the Netherlands, Poland, France, the United States, Venezuela, India, Colombia, Romania, Belarus, Thailand, etc.
Our customer base includes telecommunications companies, cable TV providers, and organizations involved in fiber optic data transmission and LAN infrastructure. Our commitment to providing the best quality products and exceptional services has earned us the trust and loyalty of our esteemed customers.
For unresolved queries, please message us promptly for a quick reply.